10 ways to calm the sounds that make your house

---

All houses make noise and these noises can be useful in Diagnosis and approaching potential problems. But if your house drives you crazy with all his creak and groan, it is time to examine how you can calm down the house.

You could carry out an intestinal renovation to make the place absolutely soundproof. However, if you do not have a substitute for the effort, you still have many relatively simple, affordable options to try out, based on what makes these noises first.

Check your decibel

First, you need some data you can use to work with – and you have to identify exactly what causes noise in your house. While some noise sources are obvious, use a simple one Decibel knife (or an app on your phone) To check the noise levels from room to room, you will receive a more specific action plan.

Average space noise is than being Between 30 and 50 decibels (db)And every noise over 70 dB is considered harmful – but the noise sensitivity is subjective. Go around and write down all the places where there is a jump in the noise levels and look into the source of the noise.

Soothe your devices

One of the main noise sources in your home are your devices. Legenders, dryers, dishwasher – everything that makes our lives easier, also generate noise and sometimes a lot of it. Most devices work with noise levels between 50 and 70 dB, so that several can be continuously continuously.

You can take a few simple steps to reduce this noise:

• Choose quieter devices. Different devices have different decibel reviews so that you can replace something next time. You can sometimes find this in the specifications of a product or look for devices that are Calm brand certified.

• Check the remaining amount. Washing machines and other devices that are moving inner parts must be balanced and on the level – if they are unbalanced, they can shake and make more noise than they should. Take a level and check whether everything is balanced. Usually you can adjust the feet of the device to expose it.

• Use anti-vibration pads. Available in different sizes, Anti-vibration pads Absorb the vibration of the device and reduce the sound that makes it.

• Install wall cladding. Hanging fabric or soundproofing materials on the walls around their devices can help absorb noises and prevent them from being guided through the walls to other areas of the house.

Check your oven

If your oven is loud, it may be worthwhile to include an HLK professional to look at it. There are some simple things that you can try out that it may have been quieter:

• Adjust the fan speed. Turn the fan speed downwards Could be everything that is necessary to wail or howling in an oven.

• Clean it. Your oven, filter and the ventilation slots with which it is connected can be clogged with dust, which means that it runs louder than usual. Clean the entire system as thoroughly as you can remove additional noises.

• Check your channels. Take a look at the channels you can, especially where you connect. All gaps or holes can lead to whistling or other noises Foil sealing band Can make a big difference in the noise level.

Add carpets and carpets

You may not want to provide the entire house with carpets, but carpets (or even carpet tiles) can offer some of the same advantages and the sounds of people who run through the room. To improve the advantages, set a Extra thick carpet pad In order to get as much sound absorption as possible from your floor cover.

Place pads under furniture

If you think about how much noise your floors transmit, don’t forget to put the padding under your furniture, where practically. You don’t go under your couch or bed, but the bare floor below can still serve as conductors and spread noises in other areas of the house. A carpet or a pad among these parts can only add a little more sound insulation.

Secure your pipes

If a noise source in your house rattling pipes, either when it is the hot water (referred to as “water hammers”) or when your heat cycles are called, you can reduce or eliminate this sound in two ways:

• Secure the pipes. Pipes that knock and beat in the walls may only have to be secured. This is not one difficult job To DIY (usually includes opening your walls). Alternatively, you can have a plumber A installed a Waterhammer representativewhat the problem should solve.

• Install the print reduction valves (PRV). A PRV regulates the water and air pressure in its pipes, which can reduce or eliminate pounding and beating. This is not exactly cheap (you can spend more than 600 US dollars if you set a plumber for an installation), but it could be worth it.

Soundproof wall panels

If something makes noise in your house, your home can act as a big sound manager – your walls almost behave like speakers and bring noise from other rooms. This applies in particular if they are not isolated. You may not want to immerse yourself in insulation (or be able), but you can easily silence some of the noises by flowing through these walls Noise -absorbing seals To sockets and light switches.

Behind these wall plates are holes in their walls, which makes it easy for noise to find its way into the room. By adding seals around the panels, you can cut the noise that is through. If you are a little more handy, you can also apply putty Around the electric boxes in the room, which also become dull all the noise before they can penetrate the room.

Update your doors

Like their walls, doors can act as a sound conductor and drive noise from outside the room directly to their ears. If your interior doors are hollow, the effect is even stronger. If you exchange them for solid -state doors, you can make your home quieter. Gaps under the door can also dive from the outside, so that a simple sweep inserts on the floor to close this gap, your door can give an additional sound of soundproofing.

Silence your creaking soils

Even if you put carpets and pads off, the floors, the creak and squeak while you go, still contribute the overall noise level in your house. The good news is that you probably do not need professional help or even any power tools to shake these floors. A few things you can do are:

• Lubricate. If your wooden floors creak, you can have a dry lubricant like Graphite powder Or even valley clumsy. Just work it in the seams between planks, where you hear a squeak, cover the area with a cloth and continue a little. Repeat the process until the squeak is gone.

• Shim. If you have access to the bottom of the soil, you can check whether there is a gap between the underbody and the bar. If this is available, inserting one or two pain to remove the movement can solve the noise problem. You can also try to drive a screw from above or down to secure the floor. If you drive it from above, use a Rapid screw And sink it under the surface of the floor so that you can fill the hole with wood filler. If you drive it from below, make sure the screw is short enough so as not to get out on the surface of the floor.

• Attach. If there is a pronounced gap or a lot of movement between your bars and the underbody, you can set the floor with a 2×4 cut between the beams. Attach it so that it is a little higher than the beams, which compensates for the gap and eliminates the movement of underbody.

• For tile floorsYou can check whether the tiles are held firmly on the underbody and use loose tiles again. Then search for gaps around the edges of the floor and suck them off. This will help to remove all tile shifts that may cause squeak.

Reduce noises before stopping

If your at home groanes or crunchy noises, it is usually classified as a “definition”, the process of a house that sinks into its foundation, and the materials that have compensated from compensated shifts and compression. This is quite natural and affects most houses at one time or the other, although a heavy stopping on A can indicate A Basic problem.

However, those settling noises could also be caused by air humidity and temperature that leads to wood and other materials expand and pull together, which leads to cracking, popping and groaning. Management of the humidity And temperature fluctuations in the household can reduce or even remove these noises.

Serve your heating system

Loud radiator

If you have steam coolers in the house, you know that you can sound like a brass band outside the key that marches through your nightmares. You can try out some simple DIY corrections to calm them down:

• Shimen it. A knocking, scratching cooler can be caused by water on the bottom of the cooler. Elevate It can eliminate this problem.

• Replace the air leveling. A cooler that whistles and roar every time the heat rises may only need a new air ventilation. This is pretty cheap and easy to do Diy.

A loud forced air stove

If you have forced heat that sounds like a battleship, the port leaves every time it begins, you may be able to calm them down without a big project:

• Canalliner. Have glass fiber Canalliner Installed in the channels, the noise caused by vibration and rattling can dampen and inhibit the intoxication capacity.

• Anti-vibration pads Under the oven itself, can also help to reduce the noise.

• Replace the filter. A dirty air filter can cause the oven to work harder, which can lead to booming or banging noises. You can also try to open your house’s supply openings.

If these steps do not help, the engine of your oven can be the cause, either due to low lubricating levels, a missing belt or another mechanical cause. It is best to call a specialist to take a look at it.